If the area is too moist, use a dehumidifier to remove the excess moisture in the walls. This causes the tape not to seal correctly, leading to larger bubbles. Sometimes, a bubble is caused by too much moisture in the wall. This step is crucial as the bubble can cause further damage to the wall, which will make the patching job more difficult. Next, use a putty knife to cut off the bubbled portion of the tape, leaving at least one inch of the tape on either side of the bubble. But, cut the tape away from the bubble by about half an inch (1 cm), so you can overlap the new tape on both sides. You can do this by using a utility knife. One of the first steps you need to take when trying to fix a bubble in drywall tape is to cut the bubble out. Then, you can repeat the procedure the following day. Once the compound is applied, smooth the edges and let it dry overnight. You can buy a 2-inch tube and apply it with a putty knife. However, some easy fixes can solve your problem. The problem can be frustrating, especially if you’re in the middle of a vast project.
BUBBLE IN DRYWALL TAPE HOW TO
You’re not alone if you’ve ever wondered how to fix a bubble in drywall taping.
Spread joint compound over the drywall seam using a putty knife, then apply a new piece of tape over the space where you removed the bubble.
Then, cut out and remove the bubbled area of tape. To fix a drywall tape bubble, first chip off any hardened joint compound on top of the bubble.
Most individuals will try to hide the bubbles with a new layer of compound. Because the joint compound was not fully imbedded on the tape, bubbles formed. Poor installation is the only explanation for bubbles developing behind the drywall tape.
0 kommentar(er)
